{"title":"Fleece","description":"","products":[{"product_id":"fleece-powerflo-in-take-fuel-lift-pump-1","title":"Fleece PowerFlo In-Take Fuel Lift Pump for 1998.5-2002 Cummins","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eComplete Fuel Supply Upgrade for 1998.5-2002 Dodge Cummins\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eOnly from Fleece Performance—a complete fuel supply upgrade kit engineered specifically for your 1998.5-2002 Dodge Cummins VP engine. This kit includes everything you need to properly route, plumb, pump, and filter fuel for maximum performance and reliability. Includes a new sending unit and float to get your fuel gauge working again!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003ePowerFlo Lift Pump: 800 HP Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. It's the only in-tank lift pump capable of supporting up to 800 horsepower—including dual CP3 pump configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect OEM In-Tank Fitment\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eNo drilling, cutting, or sumps required. The PowerFlo Lift Pump installs directly into your fuel tank in less than half the time of other high-flow lift pumps, making installation fast and hassle-free.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDual Gerotor Design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eTwo is always better than one. The PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump while supporting up to 800 horsepower.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, and the frustrating ¼ tank issues typically encountered with high-flow lift pumps. Combine with our optional fuel heater (FPE-FH-CUMM-GM) for plug-and-play fuel heating capability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eComplete Kit Includes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePowerFlo Lift Pump\u003c\/strong\u003e with integral fuel sender\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDonaldson 3-Micron Fuel Filter \u0026amp; Water Separator\u003c\/strong\u003e (Donaldson P\/N P553203)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFilter Base\u003c\/strong\u003e with integral mounting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDistribution Filter Block\/Filter Coupler\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePush Lock Hose\u003c\/strong\u003e and all necessary AN and barb fittings\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 15-17 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51392068354340,"sku":"FPE-34754","price":1049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-34754_Fleece-Performance_040825_1.jpg?v=1764881336"},{"product_id":"fleece-powerflo-in-tank-lift-pump-for-2011-2024-dodge-ram-6-7l-cummins","title":"Fleece PowerFlo In-Tank Lift Pump for 2011-2024 Dodge Ram 6.7L Cummins","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003ePowerFlo Lift Pump – 800 HP Capable In-Tank Performance\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. It's the only in-tank lift pump capable of supporting up to 800 horsepower!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect OEM In-Tank Replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains your factory water-in-fuel sensor, factory fuel heater, and factory fuel lines while installing in less than half the time of other high-flow lift pumps. No cutting, no drilling—just a direct replacement that works.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eOEM Quality – Dual Gerotor Design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eTwo is always better than one. The PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 horsepower, including dual CP3 pump configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the frustrating ¼ tank issues typically encountered when upgrading to a higher-flow lift pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eAftermarket Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eWant the benefits of an in-tank pump but need to run your own fuel lines or aftermarket filters? The pump outlet and return are threaded to accept a -8 O-ring fitting (3\/4\"-16 thread) for maximum flexibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 18-20 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2020+ Models:\u003c\/strong\u003e This pump will not work with the factory-installed 50-gallon fuel tank option\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNot for Cab \u0026amp; Chassis Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Tank Compatibility:\u003c\/strong\u003e Reference our fitment data for use in Titan and S\u0026amp;B aftermarket fuel tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51392100598052,"sku":"FPE-34562","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-34562_Fleece-Performance_040825_1.jpg?v=1764885087"},{"product_id":"powerflo-lift-pump-for-2005-2009-dodge-ram-cummins","title":"PowerFlo Lift Pump for 2005-2009 Dodge Ram Cummins","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003ePowerFlo Lift Pump – 800 HP Capable In-Tank Performance\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. It's the only in-tank lift pump capable of supporting up to 800 horsepower!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect OEM In-Tank Replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains your factory water-in-fuel sensor, factory fuel heater, and factory fuel lines while installing in less than half the time of other high-flow lift pumps. No cutting, no drilling—just a direct replacement that works.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eOEM Quality – Dual Gerotor Design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eTwo is always better than one. The PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 horsepower, including dual CP3 pump configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the frustrating ¼ tank issues typically encountered when upgrading to a higher-flow lift pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eAftermarket Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eWant the benefits of an in-tank pump but need to run your own fuel lines or aftermarket filters? The pump outlet and return are threaded to accept a -8 O-ring fitting (3\/4\"-16 thread) for maximum flexibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 18-20 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNot for Cab \u0026amp; Chassis Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Tank Compatibility:\u003c\/strong\u003e Reference our fitment data for use in Titan and S\u0026amp;B aftermarket fuel tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2004 Model Year Note:\u003c\/strong\u003e For MY 2004 trucks with a factory or dealer-retrofitted in-tank pump, you must use kit part number FPE-34755 that utilizes a plastic locking ring to retain the sending unit cap\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395132195108,"sku":"FPE-34560","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-34560_Fleece-Performance_040825_1.jpg?v=1764949876"},{"product_id":"powerflo-lift-pump-for-2010-dodge-ram-cummins","title":"PowerFlo Lift Pump for 2010 Dodge Ram Cummins","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003ePowerFlo Lift Pump – 800 HP Capable In-Tank Performance\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. It's the only in-tank lift pump capable of supporting up to 800 horsepower!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect OEM In-Tank Replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains your factory water-in-fuel sensor, factory fuel heater, and factory fuel lines while installing in less than half the time of other high-flow lift pumps. No cutting, no drilling—just a direct replacement that works.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eOEM Quality – Dual Gerotor Design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eTwo is always better than one. The PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 horsepower, including dual CP3 pump configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the frustrating ¼ tank issues typically encountered when upgrading to a higher-flow lift pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eAftermarket Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eWant the benefits of an in-tank pump but need to run your own fuel lines or aftermarket filters? The pump outlet and return are threaded to accept a -8 O-ring fitting (3\/4\"-16 thread) for maximum flexibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 18-20 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNot for Cab \u0026amp; Chassis Applications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Tank Compatibility:\u003c\/strong\u003e Reference our fitment data for use in Titan and S\u0026amp;B aftermarket fuel tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395163488548,"sku":"FPE-34561","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-34561_Fleece-Performance_040825_1.jpg?v=1764950643"},{"product_id":"powerflo-lift-pump-for-1991-1997-dodge-cummins","title":"PowerFlo Lift Pump for 1991-1997 Dodge Cummins","description":"\u003cp\u003eOnly from Fleece, a complete fuel supply upgrade kit for your 1991-1997 Dodge Cummins.  Includes a new sending unit and float to get your fuel gauge working again! The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance.  The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp! \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDirect OEM In-Tank Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe PowerFlo Lift Pump requires no drilling, cutting, or sumps to cut into your fuel tank and installs in less than half the time of other high flow lift pumps.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual Gerotor: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTwo is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeamless Integration: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePowerFlo Lift Pump with integral fuel sender\u003c\/li\u003e\n\u003cli\u003e16' of push lock hose and all necessary AN fittings\u003c\/li\u003e\n\u003cli\u003eMechanical fuel pump block off plate (FPE-CUMM-FBOP)\u003c\/li\u003e\n\u003cli\u003eWiring harness and fuse taps\u003c\/li\u003e\n\u003cli\u003eFlange tank seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Protected under US Patent No. D910,083 and US Trademark Reg. No. 6,878,860\u003c\/p\u003e\n\u003ch3\u003eApplication Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePowerFlo lift pumps are validated for usage with up to 20% biodiesel. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIMPORTANT - Verify your existing MOPAR sending unit part number is listed in the table below. If your part number is not shown, then it is not verified to fit.  Many trucks have been retrofitted over time to gasoline model tanks and the SureFlo will not fit into a retrofitted tank configuration.  For Model Year 1998 trucks equipped with a 12 valve engine - your vehicle will require our 1998 12-valve specific kit (Part Number FPE-PF-CUMM-98-12V) .  These trucks would have been originally equipped with sending unit part number 52102079AB.\u003c\/p\u003e\n\u003cp\u003eYou can also verify your proper part number by the resistance range of the level sender on your existing unit.\u003c\/p\u003e\n\u003cp\u003eIf your stock sending unit ranges\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebetween 6 – 113 ohms\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– use FPE-PF-CUMM-9198\u003c\/p\u003e\n\u003cp\u003eIf your stock sending unit ranges\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebetween 20 - 220 ohms\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– use FPE-PF-CUMM-98-12V\u003c\/p\u003e\n\u003cp\u003eLOW FUEL LEVEL LAMP - This sending unit does NOT include provisions to illuminate the Low Fuel level dash lamp.  \u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395261268260,"sku":"FPE-PF-CUMM-9197","price":889.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-PF-CUMM-9198_Fleece_1.jpg?v=1764954761"},{"product_id":"powerflo-lift-pump-and-fuel-system-upgrade-kit-for-2011-2016-ford-power-stroke-short-bed","title":"PowerFlo Lift Pump and Fuel System Upgrade kit for 2011-2016 Ford Power Stroke (Short Bed)","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eComplete PowerFlo Lift Pump Kit for 6.7L Powerstroke – 800 HP Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump is the latest drop-in lift pump from the diesel experts at Fleece Performance! Whether you're replacing your factory pump or looking to upgrade, this complete kit includes both the PowerFlo in-tank lift pump and a new frame-mounted filter base with Donaldson filter to replace your factory pump and filter assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003ePlug-and-Play Installation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eOur complete kit requires NO cutting, splicing, or modification of the factory fuel lines or fuel tank. The new filter base mounts directly in the OE filter housing location for a clean, factory-like installation. Combine this kit with our replacement under-hood filter base (FPE-FMC-UHFA-1123) and optional fuel heater (FPE-FH-FMC) for the ultimate fuel delivery setup on your 6.7 Powerstroke!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect In-Tank Replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains your factory fuel lines and water-in-fuel sensor while installing in less than half the time of other high-flow lift pumps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eUltra-Quiet Dual Gerotor Design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eTwo is always better than one. The PowerFlo delivers with two industry-proven ultra-quiet gerotor pumps, providing increased flow capacity and the ability to support up to 800 horsepower!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the frustrating ¼ tank issues typically encountered when upgrading to a higher-flow lift pump. This kit requires no cutting, splicing, or modification of existing fuel lines, harness, or fuel tank and retains all factory diagnostic functionality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eAftermarket Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eWant the benefits of an in-tank pump but need to run your own fuel lines? The pump outlet and return are threaded to accept a -8 O-ring fitting (3\/4\"-16 thread). This product has been tested and verified with 2011-2016 trucks equipped with S\u0026amp;S Diesel Motorsport DCR conversion kit and the S\u0026amp;S Diesel Motorsport CP4 Disaster Prevention Kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eComplete Kit Includes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePowerFlo Lift Pump\u003c\/strong\u003e with integral fuel level sender\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFilter Base\u003c\/strong\u003e with Donaldson filter (P\/N P553203) and provision for optional fuel heater (4-micron rating at 99% efficiency)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eWater-in-Fuel Sensor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eChassis Wiring Harness\u003c\/strong\u003e and WIF sensor extension harness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFuel Sending Unit Tank O-Ring\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eMounting Hardware\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 65-70 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eS\u0026amp;S Diesel Compatibility:\u003c\/strong\u003e Tested and verified to work with 2011-2016 trucks equipped with S\u0026amp;S Diesel Motorsport DCR conversion kit and CP4 Disaster Prevention Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Tank Compatibility:\u003c\/strong\u003e Confirmed to fit Titan and S\u0026amp;B aftermarket fuel tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395411640612,"sku":"FPE-PF-FMC-1116-SB","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-PF-FMC-1116-SB_Fleece-Performance_1.jpg?v=1764961688"},{"product_id":"powerflo-lift-pump-and-fuel-system-upgrade-kit-for-2011-2016-ford-power-stroke-long-bed-1","title":"PowerFlo Lift Pump and Fuel System Upgrade kit for 2011-2016 Ford Power Stroke (Long Bed)","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eComplete PowerFlo Lift Pump Kit for 6.7L Powerstroke – 800 HP Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump is the latest drop-in lift pump from the diesel experts at Fleece Performance! Whether you're replacing your factory pump or looking to upgrade, this complete kit includes both the PowerFlo in-tank lift pump and a new frame-mounted filter base with Donaldson filter to replace your factory pump and filter assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003ePlug-and-Play Installation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eOur complete kit requires NO cutting, splicing, or modification of the factory fuel lines or fuel tank. The new filter base mounts directly in the OE filter housing location for a clean, factory-like installation. Combine this kit with our replacement under-hood filter base (FPE-FMC-UHFA-1123) and optional fuel heater (FPE-FH-FMC) for the ultimate fuel delivery setup on your 6.7 Powerstroke!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect In-Tank Replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains your factory fuel lines and water-in-fuel sensor while installing in less than half the time of other high-flow lift pumps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eUltra-Quiet Dual Gerotor Design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eTwo is always better than one. The PowerFlo delivers with two industry-proven ultra-quiet gerotor pumps, providing increased flow capacity and the ability to support up to 800 horsepower!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the frustrating ¼ tank issues typically encountered when upgrading to a higher-flow lift pump. This kit requires no cutting, splicing, or modification of existing fuel lines, harness, or fuel tank and retains all factory diagnostic functionality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eAftermarket Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eWant the benefits of an in-tank pump but need to run your own fuel lines? The pump outlet and return are threaded to accept a -8 O-ring fitting (3\/4\"-16 thread). This product has been tested and verified with 2011-2016 trucks equipped with S\u0026amp;S Diesel Motorsport DCR conversion kit and the S\u0026amp;S Diesel Motorsport CP4 Disaster Prevention Kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eComplete Kit Includes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePowerFlo Lift Pump\u003c\/strong\u003e with integral fuel level sender\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFilter Base\u003c\/strong\u003e with Donaldson filter (P\/N P553203) and provision for optional fuel heater (4-micron rating at 99% efficiency)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eWater-in-Fuel Sensor\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eChassis Wiring Harness\u003c\/strong\u003e and WIF sensor extension harness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFuel Sending Unit Tank O-Ring\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eMounting Hardware\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 65-70 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eS\u0026amp;S Diesel Compatibility:\u003c\/strong\u003e Tested and verified to work with 2011-2016 trucks equipped with S\u0026amp;S Diesel Motorsport DCR conversion kit and CP4 Disaster Prevention Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Tank Compatibility:\u003c\/strong\u003e Confirmed to fit Titan and S\u0026amp;B aftermarket fuel tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395416162596,"sku":"FPE-PF-FMC-1116-LB","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-PF-FMC-1116-LB_Fleece-Performance_1.jpg?v=1764962217"},{"product_id":"powerflo-lift-pump-for-2011-2016-lml-duramax-short-bed","title":"PowerFlo Lift Pump for 2011-2016 LML Duramax (Short Bed)","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003ePowerFlo Lift Pump for LML Duramax – 800 HP Capable In-Tank Performance\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. It's the only in-tank lift pump capable of supporting up to 800 horsepower!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eProtect Your CP4 Injection Pump\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe LML Duramax relies on vacuum from the CP4 to draw fuel from the tank, putting extra stress on the injection pump and leading to premature failure. The PowerFlo Lift Pump provides positive fuel pressure to the CP4, decreasing strain on the injection pump while supporting up to 800 horsepower.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect OEM In-Tank Replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains your factory fuel lines and installs in less than half the time of other high-flow lift pumps. No cutting, no drilling—just a direct replacement that works.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eOEM Quality – Dual Gerotor Design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eTwo is always better than one. The PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 horsepower, including dual CP3 pump configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the frustrating ¼ tank issues typically encountered when upgrading to a higher-flow lift pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eAftermarket Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eWant the benefits of an in-tank pump but need to run your own fuel lines or aftermarket filters? The pump outlet and return are threaded to accept a -8 O-ring fitting (3\/4\"-16 thread) for maximum flexibility.\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 10-13 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eSingle Fuel Tank Configurations Only\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePickup Trucks Only\u003c\/strong\u003e – For cab \u0026amp; chassis applications, verify your pump part number using the cross-reference table\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Tank Compatibility:\u003c\/strong\u003e For fitment\/use in Titan Fuel Tanks, reference our fitment data. This pump will NOT fit S\u0026amp;B fuel tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395453780260,"sku":"FPE-34563 Details The PowerFlo* lift pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance.  The PowerFlo is the only in-tank lift pump capable of supporting up to","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-34563_Fleece-Performance_040825_1.jpg?v=1764963363"},{"product_id":"powerflo-lift-pump-for-2011-2016-lml-duramax-long-bed","title":"PowerFlo Lift Pump for 2011-2016 LML Duramax (Long Bed)","description":"\u003cp\u003e\u003cspan\u003eThe PowerFlo* lift pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance.  The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp! The LML when delivered from the factory relies on vacuum from the CP4 to draw fuel from the tank, this puts extra stress on the injection pump and can lead to premature failure.  The PowerFlo lift pump provides positive fuel pressure to the CP4, decreasing strain on the injection pump and supporting up to 800 hp. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDirect OEM In-Tank Replacement:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains the factory fuel lines and installs in less than half the time of other high flow lift pumps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOEM Quality - Dual Gerotor: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTwo is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and increased reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Capable: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWant the benefits of the in-tank pump but need to run your own fuel lines or aftermarket filters?  The pump outlet and return is threaded to accept a -8 O-ring fitting (3\/4\"-16 thread). \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eApplication Notes \u003c\/h3\u003e\n\u003cp\u003eWe recommend the use of our Auxiliary Heated Fuel Filter Kit, P\/N\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.fleeceperformance.com\/fuel-system\/fuel-filter-kits\/auxiliary-heated-fuel-filter-kit-for-2011-2016-lml-duramax.html\"\u003eFPE-DMAX-HFFBA-1116\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ein conjunction with our PowerFlo Lift Pump. The filter kit replaces the factory fuel filter housing with a new filter base, integral high-flow fuel heater, Water-In-Fuel (WIF) sensor, and Donaldson spin-on canister style filter. Our updated fuel filter base mounts in the factory location, providing for a direct factory replacement and the peace of mind to tackle the coldest of days with a high-flow fuel heater.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ePowerFlo Operating Pressure: 10-13 psi at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor use with single fuel tank configurations only\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor use on pickup style trucks only - for cab \u0026amp; chassis verify your pump P\/N to the cross-reference table.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor fitment\/use in Titan Fuel Tanks, reference our \u003ca href=\"https:\/\/www.fleeceperformance.com\/media\/wysiwyg\/Fleece_and_Titan_Powerflo_Fitment.pdf\" rel=\"noopener\" target=\"_blank\"\u003eFitment Data.\u003c\/a\u003e  This pump will not fit S\u0026amp;B fuel tanks. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePowerFlo lift pumps are validated for usage with up to 20% biodiesel. \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395521478948,"sku":"FPE-34564","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-34564_Fleece-Performance_040825_1.jpg?v=1764964249"},{"product_id":"powerflo-lift-pump-for-2007-5-2010-lmm-duramax","title":"PowerFlo Lift Pump for 2007.5-2010 LMM Duramax","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003ePowerFlo Lift Pump – 800 HP Capable In-Tank Performance\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. It's the only in-tank lift pump capable of supporting up to 800 horsepower! The PowerFlo provides positive fuel pressure to the CP3, decreasing strain on the injection pump while delivering the fuel flow your engine needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect OEM In-Tank Replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains your factory fuel lines and installs in less than half the time of other high-flow lift pumps. No cutting, no drilling—just a direct replacement that works.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eOEM Quality – Dual Gerotor Design\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eTwo is always better than one. The PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the frustrating ¼ tank issues typically encountered when upgrading to a higher-flow lift pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eAftermarket Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eWant the benefits of an in-tank pump but need to run your own fuel lines or aftermarket filters? The pump outlet and return are threaded to accept a -8 O-ring fitting (3\/4\"-16 thread) for maximum flexibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 10-13 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eSingle Fuel Tank Configurations Only\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePickup Trucks Only\u003c\/strong\u003e – For cab \u0026amp; chassis applications, verify your pump part number using the cross-reference table\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Tank Compatibility:\u003c\/strong\u003e For fitment\/use in Titan Fuel Tanks, reference our fitment data. This pump will NOT fit S\u0026amp;B fuel tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395529769252,"sku":"FPE-34790","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-34790_Fleece-Performance_040825_2.jpg?v=1764965884"},{"product_id":"powerflo-lift-pump-for-2004-5-2007-lly-lbz-duramax","title":"PowerFlo Lift Pump for 2004.5-2007 LLY\/LBZ Duramax","description":"\u003cp\u003e\u003cspan\u003eThe PowerFlo lift pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance.  The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp! .  The PowerFlo lift pump provides positive fuel pressure to the CP3, decreasing strain on the injection pump and supporting up to 800 hp. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDirect OEM In-Tank Replacement:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains the factory fuel lines and installs in less than half the time of other high flow lift pumps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOEM Quality - Dual Gerotor: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTwo is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Capable: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWant the benefits of the in-tank pump but need to run your own fuel lines or aftermarket filters?  The pump outlet and return is threaded to accept a -8 O-ring fitting (3\/4\"-16 thread). \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eApplication Notes\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cp\u003eOperating Pressure: 10-13 psi at idle\u003c\/p\u003e\n\u003cp\u003eFor use with single fuel tank congurations only.\u003c\/p\u003e\n\u003cp\u003eFor fitment\/use in Titan Fuel Tanks, reference our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.fleeceperformance.com\/media\/wysiwyg\/Fleece_and_Titan_Powerflo_Fitment.pdf\" rel=\"noopener\" target=\"_blank\"\u003eFitment Data.\u003c\/a\u003e\u003cspan\u003e  This pump will not fit S\u0026amp;B fuel tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor use on pickup style trucks only - for cab \u0026amp; chassis verify your pump P\/N to the cross-reference table.\u003c\/p\u003e\n\u003cp\u003ePowerFlo lift pumps are validated for usage with up to 20% biodiesel. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395542384932,"sku":"FPE-34789","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-34789_Fleece-Performance_040825_1.jpg?v=1764966178"},{"product_id":"powerflo-lift-pump-for-2001-2004-lb7-duramax","title":"PowerFlo Lift Pump for 2001-2004 LB7 Duramax","description":"\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eLB7 PowerFlo Lift Pump – OEM Replacement Performance\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe LB7 PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eShipping Notice:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThis product ships directly from the manufacturer. You will receive an email with the expected shipping date after your purchase is confirmed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eDirect OEM In-Tank Replacement\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe PowerFlo Lift Pump retains your factory fuel lines and installs in less than half the time of other high-flow lift pumps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eOEM Quality\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eNew sending unit electronics and fuel level float will get your fuel gauge working correctly again!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eSeamless Integration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eThe active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the frustrating ¼ tank issues typically encountered when upgrading to a higher-flow lift pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eAftermarket Capable\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cspan\u003eWant the benefits of an in-tank pump but need to run your own fuel lines or aftermarket filters? The pump outlet and return are threaded to accept a -8 O-ring fitting (3\/4\"-16 thread) for maximum flexibility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"_p_16yqn_68\"\u003e\u003cstrong\u003e\u003cspan\u003eApplication Notes:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"_ul_16yqn_92\"\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOperating Pressure:\u003c\/strong\u003e 6-8 PSI at idle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePickup Trucks Only\u003c\/strong\u003e – For cab \u0026amp; chassis applications, verify your pump part number using the cross-reference table\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAftermarket Tank Compatibility:\u003c\/strong\u003e This pump will NOT fit S\u0026amp;B fuel tanks\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBiodiesel Compatible:\u003c\/strong\u003e Validated for use with up to 20% biodiesel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":51395555754276,"sku":"FPE-PF-GM-0104","price":649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-PF-GM-0104_Fleece-Performance_2023_6.jpg?v=1764966495"},{"product_id":"03-05-ram-25003500-cummins-03-05-to-2006-valve-cover-conversion-harness","title":"03-05 RAM 2500\/3500 CUMMINS (03-05 TO 2006+) VALVE COVER CONVERSION HARNESS","description":"\u003ch2\u003eValve Cover Conversion Harness — 2003–2005 RAM 2500\/3500 Cummins (Early to 2006+ Style)\u003c\/h2\u003e\u003cp\u003eUpgrading your 2003–2005 5.9L Cummins with a 2006+ style valve cover? The factory wiring harness connector changed between generations — making a direct swap impossible without this conversion harness. The Fleece Valve Cover Conversion Harness bridges the gap between your early 2003–2005 engine harness and the updated 2006+ valve cover, allowing a clean, plug-and-play installation without cutting or splicing factory wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Conversion\u003c\/strong\u003e — Connects your 2003–2005 engine harness to a 2006+ style valve cover without cutting or modifying factory wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnables 2006+ Valve Cover Upgrade\u003c\/strong\u003e — Required adapter for installing a late-style valve cover on early 5.9L Cummins applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Professional Installation\u003c\/strong\u003e — Maintains factory wiring integrity for a reliable, long-term result\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fitment\u003c\/strong\u003e — Designed specifically for 2003–2005 RAM 2500\/3500 5.9L Cummins applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFleece Performance Engineering\u003c\/strong\u003e — Trusted quality from a proven diesel performance brand\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003–2005 RAM 2500 \u0026amp; 3500\u003c\/li\u003e\n\u003cli\u003e5.9L Cummins Diesel\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFor use when installing a 2006+ style valve cover on an early 5.9L Cummins\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSKU: FPE-HAR-CUMM-VC-ADPT-EARLY | Vendor: Fleece\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611804586276,"sku":"FPE-HAR-CUMM-VC-ADPT-EARLY","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-har-cumm-vc-adpt-early.jpg?v=1781302542"},{"product_id":"06-10-gm-25003500-duramax-lbzlmm-cp3-stock-replacement","title":"06-10 GM 2500\/3500 DURAMAX LBZ\/LMM CP3 STOCK REPLACEMENT","description":"\u003ch2\u003eStock Replacement CP3 Injection Pump for 2006–2010 Duramax LBZ\/LMM\u003c\/h2\u003e\u003cp\u003eKeep your 6.6L Duramax running at peak performance with this direct stock replacement CP3 high-pressure fuel injection pump from Fleece Performance. Engineered to restore factory fuel delivery on your 2006–2010 GM 2500\/3500 equipped with the LBZ or LMM engine, this pump installs without modification and gets you back on the road fast.\u003c\/p\u003e\u003ch3\u003eWhy Replace Your CP3?\u003c\/h3\u003e\u003cp\u003eThe CP3 pump is the heart of your Duramax common rail fuel system. A worn or failing pump leads to hard starts, rough idle, loss of power, and excessive smoke. Replacing it with a quality unit restores proper rail pressure and protects your injectors from premature wear.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect OEM stock replacement — no modifications required\u003c\/li\u003e\n\u003cli\u003eRestores factory fuel rail pressure and delivery volume\u003c\/li\u003e\n\u003cli\u003eCompatible with 2006–2007 LBZ and 2007.5–2010 LMM Duramax engines\u003c\/li\u003e\n\u003cli\u003eBuilt by Fleece Performance, a trusted name in diesel fuel system components\u003c\/li\u003e\n\u003cli\u003eIdeal for high-mileage trucks needing a reliable, cost-effective pump replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2006–2007 GM 2500\/3500 Duramax LBZ\u003c\/li\u003e\n\u003cli\u003e2007.5–2010 GM 2500\/3500 Duramax LMM\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhether you're maintaining a work truck or keeping a daily driver on the road, this CP3 replacement delivers the reliability your Duramax demands.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611814351140,"sku":"FPE-DMAX-CP3","price":1379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-dmax-cp3_1.jpg?v=1781110426"},{"product_id":"06-c-cummins-59l67l-injector-connector-w-pigtail","title":"06-C CUMMINS 5.9L\/6.7L INJECTOR CONNECTOR W\/ PIGTAIL","description":"\u003ch2\u003eCummins 5.9L\/6.7L Injector Connector with Pigtail | 2006 \u0026amp; Newer\u003c\/h2\u003e\u003cp\u003eFix injector wiring issues fast with this direct replacement Injector Connector with Pigtail from Fleece Performance. Built for 2006 and newer Dodge\/Ram trucks equipped with the 5.9L or 6.7L Cummins, this connector restores a clean, reliable electrical connection to your fuel injectors — eliminating misfires, rough idle, and injector fault codes caused by damaged or corroded wiring.\u003c\/p\u003e\u003ch3\u003eWhy Replace the Injector Connector?\u003c\/h3\u003e\u003cp\u003eOver time, heat cycles and vibration cause injector connectors to crack, corrode, or lose their locking retention. A poor injector connection leads to cylinder misfires, excessive smoke, hard starts, and injector-related fault codes. Replacing the connector and pigtail is a fast, inexpensive fix that restores proper injector operation without replacing the entire injector.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement connector with pre-attached pigtail wiring\u003c\/li\u003e\n\u003cli\u003eRestores clean electrical signal to fuel injectors\u003c\/li\u003e\n\u003cli\u003eResolves injector fault codes and misfire conditions\u003c\/li\u003e\n\u003cli\u003eCompatible with 2006+ Cummins 5.9L and 6.7L engines\u003c\/li\u003e\n\u003cli\u003eFrom Fleece Performance — a trusted name in Cummins fuel system components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2006+ Dodge\/Ram 2500\/3500 Cummins 5.9L\u003c\/li\u003e\n\u003cli\u003e2007.5–2018 Ram 2500\/3500 Cummins 6.7L\u003c\/li\u003e\n\u003cli\u003e2019–2024 Ram 2500\/3500 Cummins 6.7L\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA simple, affordable repair that keeps your Cummins firing on all cylinders.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611814744356,"sku":"FPE-HAR-CUMM-INJ-PT","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-har-cumm-inj-pt.jpg?v=1781115284"},{"product_id":"11-16-f250350-67l-power-stroke-injector-return-line-repair-fitting","title":"11-16 F250\/350 6.7L POWER STROKE INJECTOR RETURN LINE REPAIR FITTING","description":"\u003ch2\u003eInjector Return Line Repair Fitting — 2011–2016 Ford F-250\/F-350 6.7L Power Stroke\u003c\/h2\u003e\u003cp\u003eLeaking injector return line fittings are a common issue on the 2011–2016 Ford Super Duty 6.7L Power Stroke — causing fuel leaks, rough running, fuel odor, and potential safety hazards. This direct-fit repair fitting provides a fast, reliable fix that restores a proper fuel-tight seal without the expense of replacing the entire return line assembly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Repair Fitting\u003c\/strong\u003e — Designed to repair damaged or leaking injector return line connections on 2011–2016 6.7L Power Stroke applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost-Effective Solution\u003c\/strong\u003e — Restores a proper fuel-tight seal without replacing the entire return line assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStops Fuel Leaks\u003c\/strong\u003e — Eliminates injector return line leaks that cause rough running, fuel odor, and fire risk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fitment\u003c\/strong\u003e — Engineered specifically for 2011–2016 Ford F-250 and F-350 Super Duty with the 6.7L Power Stroke\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality Construction\u003c\/strong\u003e — Built to withstand the fuel pressure and heat demands of the 6.7L Power Stroke fuel system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011–2016 Ford F-250 \u0026amp; F-350 Super Duty\u003c\/li\u003e\n\u003cli\u003e6.7L Power Stroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSKU: FPE-FMC-FF-RLK-1116 | Vendor: Fleece\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611815104804,"sku":"FPE-FMC-FF-RLK-1116","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-fmc-ff-rlk-1116.jpg?v=1781281365"},{"product_id":"2013-2016-67l-cummins-ac-line-reroute-kit","title":"2013-2016 6.7L CUMMINS A\/C LINE REROUTE KIT","description":"\u003ch2\u003eFleece A\/C Line Reroute Kit — 2013–2016 RAM 6.7L Cummins\u003c\/h2\u003e\u003cp\u003eOn 2013–2016 RAM trucks with the 6.7L Cummins, the factory A\/C lines run directly in the path of common performance upgrades — making turbo installs, intake work, and other modifications unnecessarily difficult. The Fleece A\/C Line Reroute Kit relocates these lines out of the way, giving you the clearance needed for a clean, professional build without cutting corners or compromising your A\/C system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClears the Way for Performance Upgrades\u003c\/strong\u003e — Relocates factory A\/C lines that interfere with turbo installs, intakes, and other common 6.7L Cummins modifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintains Full A\/C Function\u003c\/strong\u003e — Reroutes lines without compromising your air conditioning system performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, Professional Fitment\u003c\/strong\u003e — Designed for a factory-quality appearance under the hood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fitment\u003c\/strong\u003e — Engineered specifically for 2013–2016 RAM 2500\/3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Kit\u003c\/strong\u003e — Includes all necessary hardware and fittings for a straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2013–2016 RAM 2500 \u0026amp; 3500\u003c\/li\u003e\n\u003cli\u003e6.7L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVendor: Fleece\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611815956772,"sku":"FPE-AC-KIT-1316","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-ac-kit-1316_01.jpg?v=1781215198"},{"product_id":"63mm-fmw-duramax-vnt-cheetah-turbocharger-lml","title":"63MM FMW DURAMAX VNT CHEETAH TURBOCHARGER(LML)","description":"\u003ch2\u003eFleece 63mm FMW VNT Cheetah Turbocharger — 2011–2016 GM Duramax LML\u003c\/h2\u003e\u003cp\u003eTake your LML Duramax to the next level with the Fleece 63mm FMW VNT Cheetah Turbocharger. Featuring a 63mm forged milled wheel (FMW) compressor and variable nozzle turbine (VNT) technology, this turbo delivers a significant airflow upgrade over stock while maintaining the drivability and response you expect from a bolt-in replacement. Built for LML trucks that demand more — whether towing heavy or chasing horsepower.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e63mm Forged Milled Wheel (FMW)\u003c\/strong\u003e — High-strength forged compressor wheel for increased airflow capacity and durability over cast alternatives\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Nozzle Turbine (VNT)\u003c\/strong\u003e — Optimizes boost across the full RPM range for strong low-end torque and top-end power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bolt-In Fitment\u003c\/strong\u003e — Engineered specifically for 2011–2016 GM Duramax LML; no custom fabrication required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignificant Airflow Upgrade\u003c\/strong\u003e — Supports higher horsepower and torque levels well beyond the stock turbo's capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFleece Performance Engineering\u003c\/strong\u003e — Trusted by diesel performance enthusiasts for precision-built turbo upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011–2016 GM Duramax LML\u003c\/li\u003e\n\u003cli\u003eChevrolet Silverado \u0026amp; GMC Sierra 2500\/3500 HD\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSKU: FPE-LML-VNT-63-FMW-N | Vendor: Fleece\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611816022308,"sku":"FPE-LML-VNT-63-FMW-N","price":2649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-lml-vnt-63-fmw-n_1.jpg?v=1781214809"},{"product_id":"67l-cummins-cp3k","title":"2007.5-2018 6.7L CUMMINS CP3K","description":"\u003ch2\u003eFleece CP3K Conversion Kit — 2007.5–2018 6.7L Cummins\u003c\/h2\u003e\u003cp\u003eThe Fleece CP3K is the ultimate fuel system upgrade for serious 6.7L Cummins builds. This conversion kit replaces the factory CP4 injection pump with a proven CP3-based system — eliminating the catastrophic failure risk associated with the OEM CP4 while delivering the high-pressure fuel volume needed to support big horsepower. Whether you're building a competition truck or protecting a daily driver, the CP3K is the definitive solution.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP4 to CP3 Conversion\u003c\/strong\u003e — Eliminates the failure-prone factory CP4 pump and replaces it with the more reliable CP3 platform\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatastrophic Failure Prevention\u003c\/strong\u003e — The OEM CP4 is known to send metal debris through the entire fuel system when it fails; the CP3K removes that risk entirely\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Volume Fuel Delivery\u003c\/strong\u003e — Supports elevated horsepower builds with consistent, high-pressure fuel supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fitment\u003c\/strong\u003e — Engineered specifically for 2007.5–2018 RAM 2500\/3500 6.7L Cummins applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFleece Performance Engineering\u003c\/strong\u003e — Designed and built by one of the most trusted names in diesel fuel system performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2007.5–2018 RAM 2500 \u0026amp; 3500\u003c\/li\u003e\n\u003cli\u003e6.7L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSKU: FPE-CUMM-CP3K-6.7 | Vendor: Fleece\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611816055076,"sku":"FPE-CUMM-CP3K-6.7","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe_cp3_pumps.jpg?v=1781214427"},{"product_id":"ram-25003500-67l-cummins-coolant-bypass-kit","title":"2007.5 -2012 RAM 2500\/3500 6.7L CUMMINS COOLANT BYPASS KIT","description":"\u003ch2\u003eFleece Coolant Bypass Kit — 2007.5–2012 RAM 2500\/3500 6.7L Cummins\u003c\/h2\u003e\u003cp\u003eThe 6.7L Cummins EGR cooler is a known weak point — prone to failure, coolant contamination, and costly engine damage. The Fleece Coolant Bypass Kit eliminates the problem at the source by rerouting coolant flow away from the factory EGR cooler, protecting your engine and keeping your cooling system running clean.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEGR Cooler Bypass\u003c\/strong\u003e — Eliminates the factory EGR cooler from the coolant circuit, removing a common failure point on the 6.7L Cummins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrevents Coolant Contamination\u003c\/strong\u003e — Stops coolant from entering the intake in the event of an EGR cooler crack or failure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects Engine Internals\u003c\/strong\u003e — Reduces the risk of hydrolocking and catastrophic engine damage caused by coolant intrusion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Kit\u003c\/strong\u003e — Includes all necessary hardware and fittings for a clean, professional installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fitment\u003c\/strong\u003e — Designed specifically for 2007.5–2012 RAM 2500\/3500 with the 6.7L Cummins\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2007.5–2012 RAM 2500 \u0026amp; 3500\u003c\/li\u003e\n\u003cli\u003e6.7L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSKU: FPE-CLNTBYPS-CUMMINS-0712 | Vendor: Fleece\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611817267492,"sku":"FPE-CLNTBYPS-CUMMINS-0712","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-CLNTBYPS-CUMMINS-0712-K1.jpg?v=1781193001"},{"product_id":"ram-25003500-67l-cummins-powerflo-1000-cp3-pump","title":"RAM 2500\/3500 6.7L CUMMINS POWERFLO 1000 CP3 PUMP","description":"\u003ch2\u003eFleece PowerFlo 1000 CP3 Pump — 6.7L Cummins\u003c\/h2\u003e\u003cp\u003eWhen your stock CP3 can't keep up with your power goals, the Fleece PowerFlo 1000 steps in. Engineered for the 6.7L Cummins in RAM 2500\/3500 applications, this high-output CP3 pump delivers the fuel volume needed to support serious horsepower builds — without sacrificing streetability or daily drivability.\u003c\/p\u003e\u003ch3\u003eWhy the PowerFlo 1000?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Volume Fuel Delivery\u003c\/strong\u003e — Supports up to 1,000+ horsepower builds with consistent rail pressure under load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12mm Stroker Design\u003c\/strong\u003e — Increased stroke over stock for significantly higher fuel output at all RPMs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Replacement\u003c\/strong\u003e — Bolt-in fitment for 2007.5–2018 RAM 2500\/3500 6.7L Cummins; no custom lines or adapters required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFleece Performance Engineering\u003c\/strong\u003e — Built by one of the most trusted names in diesel fuel system upgrades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreet \u0026amp; Competition Ready\u003c\/strong\u003e — Equally at home on a tow rig or a competition sled pull truck\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2007.5–2018 RAM 2500 \u0026amp; 3500\u003c\/li\u003e\n\u003cli\u003e6.7L Cummins Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSKU: FPE-CUMM-CP3-12MM-6.7 | Vendor: Fleece\u003c\/p\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":54611817300260,"sku":"FPE-CUMM-CP3-12MM-6.7","price":2599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-cumm-cp3-12mm-6.7.jpg?v=1781192104"},{"product_id":"ram-3500-67l-cummins-coolant-bypass-kit","title":"2013-2018 RAM 3500 6.7L CUMMINS COOLANT BYPASS KIT","description":"\u003ch2\u003eCoolant Bypass Kit | 2013–2018 Ram 3500 6.7L Cummins\u003c\/h2\u003e\u003cp\u003eKeep your 2013–2018 Ram 3500's 6.7L Cummins protected from one of the platform's most preventable failures with the Fleece Performance Coolant Bypass Kit. This kit addresses the factory coolant flow restriction in the cylinder head that allows hot, stagnant coolant to pool around the injector cups — the root cause of injector cup erosion, coolant contamination, and costly cylinder head repairs on the 6.7L Cummins.\u003c\/p\u003e\u003ch3\u003eWhy This Kit Is Essential for the 2013–2018 6.7L\u003c\/h3\u003e\u003cp\u003eThe 2013–2018 Ram 3500 6.7L Cummins is a workhorse engine, but its cylinder head coolant flow design leaves injector cups vulnerable to localized overheating. As coolant stagnates around the cups, corrosion accelerates and the cup sealing surface erodes. Once a cup fails, coolant enters the combustion chamber — leading to white smoke, misfires, hydrolocking, and a repair bill that dwarfs the cost of this kit. The Fleece coolant bypass kit keeps coolant moving continuously, dramatically extending injector cup and head gasket life.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorrects factory coolant flow restriction specific to the 2013–2018 6.7L application\u003c\/li\u003e\n\u003cli\u003eEliminates hot spots and stagnant coolant around injector cups\u003c\/li\u003e\n\u003cli\u003eReduces injector cup erosion and failure risk\u003c\/li\u003e\n\u003cli\u003ePrevents coolant intrusion into the combustion chamber and fuel system\u003c\/li\u003e\n\u003cli\u003eComplete kit with all necessary hardware for installation\u003c\/li\u003e\n\u003cli\u003eFrom Fleece Performance — a trusted name in Cummins reliability upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2013–2018 Ram 3500 6.7L Cummins\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eHigh-mileage tow rigs and work trucks put enormous demands on the cooling system. Don’t let a preventable failure sideline your Ram 3500 — install the Fleece coolant bypass kit and protect your investment.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611817398564,"sku":"FPE-CLNTBYPS-CUMMINS-1318","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-clntbyps-cummins-1318.jpg?v=1781128715"},{"product_id":"ram-67l-cummins-coolant-bypass-kit","title":"2019-2022 RAM 6.7L CUMMINS COOLANT BYPASS KIT","description":"\u003ch2\u003eCoolant Bypass Kit | Ram 6.7L Cummins\u003c\/h2\u003e\u003cp\u003eProtect your 6.7L Cummins from injector cup erosion and premature cylinder head failures with the Fleece Performance Coolant Bypass Kit. Designed for Ram 2500\/3500 trucks equipped with the 6.7L Cummins, this kit corrects the factory coolant flow restriction in the cylinder head — keeping coolant circulating continuously around the injector cups and preventing the localized overheating that leads to cup failure and coolant contamination of the fuel system.\u003c\/p\u003e\u003ch3\u003eWhy the 6.7L Cummins Needs a Coolant Bypass Kit\u003c\/h3\u003e\u003cp\u003eLike its 5.9L predecessor, the 6.7L Cummins suffers from restricted coolant flow through the cylinder head under certain operating conditions. Stagnant coolant around the injector cups accelerates corrosion and erosion of the cup sealing surface. Once a cup fails, coolant enters the combustion chamber — causing white smoke, misfires, hydrolocking, and expensive head repairs. The Fleece coolant bypass kit is the most effective preventive measure available to 6.7L Cummins owners.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorrects factory coolant flow restriction in the 6.7L cylinder head\u003c\/li\u003e\n\u003cli\u003eKeeps coolant circulating around injector cups to prevent hot spots\u003c\/li\u003e\n\u003cli\u003eDramatically reduces injector cup erosion and failure risk\u003c\/li\u003e\n\u003cli\u003ePrevents coolant intrusion into the combustion chamber and fuel system\u003c\/li\u003e\n\u003cli\u003eComplete kit with all necessary hardware for installation\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the Ram 6.7L Cummins application\u003c\/li\u003e\n\u003cli\u003eFrom Fleece Performance — a trusted name in Cummins reliability upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRam 2500\/3500 6.7L Cummins (see SKU FPE-CLNTBYPS-CUMMINS-19 for specific year applicability)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eDon’t wait for the white smoke. The Fleece coolant bypass kit is one of the best investments you can make in the long-term health of your 6.7L Cummins.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611817464100,"sku":"FPE-CLNTBYPS-CUMMINS-19","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-clntbyps-cummins-19.jpg?v=1781128460"},{"product_id":"replacement-fuel-injector-connector-wpigtail-for-l5p-duramax","title":"REPLACEMENT FUEL INJECTOR CONNECTOR W\/PIGTAIL FOR L5P DURAMAX","description":"\u003ch2\u003eReplacement Fuel Injector Connector with Pigtail | L5P Duramax\u003c\/h2\u003e\u003cp\u003eRestore proper injector operation on your L5P Duramax with this direct replacement Fuel Injector Connector and Pigtail from Fleece Performance. Compatible with the 2011–2023 GM Silverado\/Sierra equipped with the LML, L5P, and related Duramax engines, this connector provides a clean, reliable electrical connection to your fuel injectors — resolving misfires, rough idle, and injector fault codes caused by damaged or degraded wiring.\u003c\/p\u003e\u003ch3\u003eWhy Injector Connectors Fail\u003c\/h3\u003e\u003cp\u003eInjector connectors on the Duramax are exposed to constant heat cycling, vibration, and fuel vapor. Over time the plastic housing cracks, terminals corrode, and locking tabs break — causing intermittent or complete loss of injector signal. The result is cylinder misfires, excessive smoke, hard starts, and injector-related DTCs. Replacing the connector and pigtail is a fast, low-cost fix that restores injector communication without replacing the injector itself.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement injector connector with pre-attached pigtail wiring\u003c\/li\u003e\n\u003cli\u003eRestores clean electrical signal to fuel injectors\u003c\/li\u003e\n\u003cli\u003eResolves injector fault codes and misfire conditions\u003c\/li\u003e\n\u003cli\u003eCompatible with LML and L5P Duramax applications (2011–2023)\u003c\/li\u003e\n\u003cli\u003eFrom Fleece Performance — a trusted name in Duramax fuel system components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011–2016 GM Silverado\/Sierra 2500\/3500 6.6L Duramax LML\u003c\/li\u003e\n\u003cli\u003e2017–2019 GM Silverado\/Sierra 2500\/3500 6.6L Duramax L5P\u003c\/li\u003e\n\u003cli\u003e2020–2023 GM Silverado\/Sierra 2500\/3500 6.6L Duramax L5P\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBefore you pull an injector, check the connector. This pigtail replacement is often all it takes to get your Duramax running clean again.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611817496868,"sku":"FPE-HAR-L5P-INJ-PT","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-har-l5p-inj-pt.jpg?v=1781126804"},{"product_id":"silveradosierra-l5p-duramax-cheetah-turbocharger","title":"SILVERADO\/SIERRA L5P DURAMAX CHEETAH TURBOCHARGER","description":"\u003ch2\u003eCheetah Turbocharger | 2017–2026 GM Silverado\/Sierra L5P Duramax\u003c\/h2\u003e\u003cp\u003eTake your L5P Duramax to the next level with the Fleece Performance Cheetah Turbocharger. Engineered specifically for the 2017–2026 GM Silverado\/Sierra 2500\/3500 equipped with the 6.6L L5P, the Cheetah delivers a significant upgrade in airflow and power potential over the factory turbo while maintaining the drivability and reliability your truck demands every day.\u003c\/p\u003e\u003ch3\u003eWhy Upgrade the L5P Turbo?\u003c\/h3\u003e\u003cp\u003eThe L5P Duramax is one of the most capable factory diesel trucks ever produced, but the stock turbocharger becomes a limiting factor as soon as you start adding fuel and tuning. The Fleece Cheetah is purpose-built to support higher horsepower levels with improved compressor efficiency, faster spool, and greater top-end airflow — making it the ideal upgrade for towing builds, performance street trucks, and competition applications alike.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePurpose-built upgrade turbocharger for the 6.6L L5P Duramax\u003c\/li\u003e\n\u003cli\u003eImproved compressor efficiency for faster spool and greater airflow\u003c\/li\u003e\n\u003cli\u003eSupports significantly higher horsepower levels over the factory turbo\u003c\/li\u003e\n\u003cli\u003eMaintains excellent street manners and daily drivability\u003c\/li\u003e\n\u003cli\u003eDirect fit for 2017–2026 L5P applications\u003c\/li\u003e\n\u003cli\u003eBuilt by Fleece Performance — the benchmark in Duramax turbo upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2017–2019 GM Silverado\/Sierra 2500\/3500 6.6L Duramax L5P\u003c\/li\u003e\n\u003cli\u003e2020–2026 GM Silverado\/Sierra 2500\/3500 6.6L Duramax L5P\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe L5P deserves a turbo that can keep up with its potential. The Fleece Cheetah is built to deliver more power, more efficiently — without sacrificing the reliability you rely on.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611817562404,"sku":"FPE-L5P-VNT63-1723","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-L5P-VNT63-1723_V2.jpg?v=1781124966"},{"product_id":"2003-2005-cummins-coolant-bypass-kit","title":"2003-2005 CUMMINS COOLANT BYPASS KIT","description":"\u003ch2\u003eCoolant Bypass Kit | 2003–2005 Dodge\/Ram Cummins 5.9L\u003c\/h2\u003e\u003cp\u003eStop injector cup failures before they start with the Fleece Performance Coolant Bypass Kit for the 2003–2005 Dodge\/Ram 2500\/3500 Cummins 5.9L. This kit corrects the factory coolant flow restriction in the cylinder head that allows hot, stagnant coolant to pool around the injector cups — the root cause of one of the most expensive and common failures on the early common rail 5.9L Cummins.\u003c\/p\u003e\u003ch3\u003eThe Problem This Kit Solves\u003c\/h3\u003e\u003cp\u003eEarly common rail 5.9L Cummins engines (2003–2005) are particularly susceptible to injector cup erosion due to inadequate coolant circulation in the head. As coolant stagnates around the cups, localized overheating accelerates corrosion and erosion of the cup sealing surface. Once a cup fails, coolant enters the combustion chamber and fuel system — leading to white smoke, misfires, hydrolocking, and a full head repair bill. The Fleece coolant bypass kit keeps coolant moving continuously, dramatically reducing this risk.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorrects factory coolant flow restriction in the cylinder head\u003c\/li\u003e\n\u003cli\u003eEliminates hot spots around injector cups\u003c\/li\u003e\n\u003cli\u003eDramatically reduces injector cup erosion and failure risk\u003c\/li\u003e\n\u003cli\u003ePrevents coolant intrusion into the combustion chamber and fuel system\u003c\/li\u003e\n\u003cli\u003eComplete kit with all hardware needed for installation\u003c\/li\u003e\n\u003cli\u003eSpecifically engineered for the 2003–2005 5.9L Cummins application\u003c\/li\u003e\n\u003cli\u003eFrom Fleece Performance — a leader in Cummins reliability and performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2003–2005 Dodge Ram 2500\/3500 Cummins 5.9L Common Rail\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eIf you own a 2003–2005 5.9L Cummins, this is not an if — it’s a when. Install the Fleece coolant bypass kit now and avoid the most preventable failure on the platform.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611892076836,"sku":"FPE-CLNTBYPS-CUMMINS-0305","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-clntbyps-cummins-0305_1.jpg?v=1781123994"},{"product_id":"2006-2007-cummins-coolant-bypass-kit","title":"2006-2007 CUMMINS COOLANT BYPASS KIT","description":"\u003ch2\u003eCoolant Bypass Kit | 2006–2007 Dodge\/Ram Cummins 5.9L\u003c\/h2\u003e\u003cp\u003eProtect your late 5.9L Cummins from injector cup erosion and cylinder head damage with the Fleece Performance Coolant Bypass Kit, specifically designed for 2006–2007 Dodge\/Ram 2500\/3500 trucks. This kit addresses the factory coolant flow restriction in the cylinder head that causes localized overheating around the injector cups — a known failure point on the final generation of the 5.9L common rail Cummins.\u003c\/p\u003e\u003ch3\u003eWhy You Need a Coolant Bypass Kit\u003c\/h3\u003e\u003cp\u003eThe late 5.9L Cummins (2006–2007) shares the same inherent coolant flow design flaw as earlier common rail engines. Stagnant coolant around the injector cups leads to accelerated cup erosion, allowing coolant to enter the combustion chamber and fuel system. The symptoms — white smoke, rough running, and coolant loss — often appear only after significant damage has already occurred. Installing the Fleece coolant bypass kit is the most effective preventive measure you can take to protect your engine.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates stagnant coolant flow around injector cups\u003c\/li\u003e\n\u003cli\u003eReduces localized overheating in the cylinder head\u003c\/li\u003e\n\u003cli\u003eExtends injector cup and cylinder head gasket life\u003c\/li\u003e\n\u003cli\u003ePrevents coolant contamination of the fuel system\u003c\/li\u003e\n\u003cli\u003eComplete kit with all necessary hardware for installation\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for the 2006–2007 5.9L Cummins application\u003c\/li\u003e\n\u003cli\u003eFrom Fleece Performance — a trusted name in Cummins reliability upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2006–2007 Dodge Ram 2500\/3500 Cummins 5.9L Common Rail\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe 5.9L Cummins is one of the most capable diesel engines ever built — keep it that way. The Fleece coolant bypass kit is essential preventive maintenance for any 2006–2007 owner who wants to avoid a costly head job down the road.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611892109604,"sku":"CLNTBYPS-CUMMINS-0607","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/fpe-clntbyps-cummins-0607-2.jpg?v=1781123582"},{"product_id":"2003-2007-cummins-coolant-bypass-kit","title":"2003-2007 CUMMINS COOLANT BYPASS KIT","description":"\u003ch2\u003eCoolant Bypass Kit | 2003–2007 Dodge\/Ram Cummins 5.9L\u003c\/h2\u003e\u003cp\u003eProtect your 5.9L Cummins from premature injector cup and cylinder head failures with the Fleece Performance Coolant Bypass Kit. Designed for 2003–2007 Dodge\/Ram 2500\/3500 trucks, this kit reroutes coolant flow to eliminate the factory design flaw that allows hot, stagnant coolant to sit around the injector cups — one of the leading causes of cup erosion, coolant contamination, and catastrophic head damage on the 5.9L common rail Cummins.\u003c\/p\u003e\u003ch3\u003eWhy You Need a Coolant Bypass Kit\u003c\/h3\u003e\u003cp\u003eThe 2003–2007 5.9L Cummins has a known issue where coolant flow through the cylinder head becomes restricted and stagnant around the injector cups. This localized overheating accelerates injector cup erosion, allowing coolant to enter the combustion chamber and fuel system. Left unaddressed, it leads to white smoke, hydrolocking, and expensive head repairs. The Fleece coolant bypass kit keeps coolant moving, reducing heat soak and dramatically extending the life of your injector cups and head gasket.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates stagnant coolant flow around injector cups\u003c\/li\u003e\n\u003cli\u003eReduces localized overheating in the cylinder head\u003c\/li\u003e\n\u003cli\u003eExtends injector cup and cylinder head life\u003c\/li\u003e\n\u003cli\u003eHelps prevent coolant contamination of the fuel system\u003c\/li\u003e\n\u003cli\u003eComplete kit with all necessary hardware for installation\u003c\/li\u003e\n\u003cli\u003eFrom Fleece Performance — a trusted name in Cummins performance and reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2003–2004 Dodge Ram 2500\/3500 Cummins 5.9L CR\u003c\/li\u003e\n\u003cli\u003e2004.5–2007 Dodge Ram 2500\/3500 Cummins 5.9L CR\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is one of the best preventive maintenance upgrades you can do on a 5.9L common rail Cummins. Don't wait for injector cup failure — install the bypass kit and keep your engine protected.\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":54611892207908,"sku":"FPE-CLNTBYPS-CUMMINS-MAN","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/files\/FPE-CLNTBYPS-CUMMINS-MAN_1_thmb.jpg?v=1781123235"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0975\/7202\/8708\/collections\/FleecePerformance_PantoneColorLogo_Brandsmith_5c7f41f6-63c8-4afd-bf79-e2686e97eb09.png?v=1781816208","url":"https:\/\/autodieselsystems.com\/collections\/fleece.oembed","provider":"Auto Diesel Systems","version":"1.0","type":"link"}